Electro-Hydraulic Cattle Crush

Our hydro-electric PSC 5PHE cattle crush is equipped with an electric lifting device, which allows for the trimming of hooves in an upright position without additional overstretching of the spine.


The entire crush along with a cow is raised to a height of 50 cm thanks to a hydraulic power unit while the rest is driven by an electric geared motor. Front lifts are sliding and equipped with an electric geared motor with a power of 180 W which lifts the legs of the animal. Hind legs are also lifted with the use of a geared motor with a power of 180 W and are attached to a specially designed rear gate. Lifts maintain a steady and secure position of a hoof when trimming. The frame is made of a durable steel construction and anti-slip floor made of riffled plate. All parts of the crush are zinc galvanized for maximum corrosion resistance.

 

The crush provides easy and secure access to the animal, locking it at the same time. The crush has 2 worm gears, which are actuated by gear motors with a power of 370W; also abdominal and chest belts as well as an accessory to hoist the cow by its rear groin to lift it off the ground.

 

Advantages of the device:

  • Hydraulic lift up to 50 cm to allow for trimming of front hooves in an upright position

  • Unique rear gate enables trimming of the hooves in an upright position

  • Electric raising of front and rear legs with German electric geared motors

  • Front and rear lighting to improve working conditions in the barns

24989643_1985372551676616_616303761_n
25276274_1985372585009946_151027345_n
24992215_1985372548343283_271406781_n
21462759_1986775938268952_1571916436136584186_n
24992483_1985372535009951_2095722615_n
24992075_1985372581676613_1715918248_n
25114889_1985372555009949_780872031_n
25114678_1985372578343280_588346634_n
25181969_1985372595009945_720590021_n
25181581_1985372565009948_1399838061_n

Please contact us for more information or to purchase. 

Electric Cattle Crush

25115003_1985377025009502_415828769_n
25105848_1985377041676167_1272770466_n

The cattle crush KPB-5PE has a locking rear entrance and a front latch exit where the head of the animal is secured. The frame is made of a durable steel construction and has an anti-slip floor made of rippled plate. All parts of the crush are zinc galvanized for maximum corrosion resistance.

 

The crush allows for easy and safe access to the animal, locking it in position at the same time. In the crush, we have an abdominal and chest belt, worm gear and electric drive systems which help to lift the animal’s legs. All this ensures a stable maintenance of the determined position of the raised leg while trimming the hoof.

 

In addition, the cage is equipped with an accessory to hoist the cow by its rear groin. The KPB-5PE crush is also equipped with three electric geared motors with power of 0.18 kW used to raise the legs and two electric geared motors with power of 0.37kW to raise the cows with the help of chest and abdominal belts or a groin chain.

 

Please contact us for more information

or to purchase. 

Manual Cattle Crush

Please contact us for more information
or to purchase. 

24989663_1985375675009637_30407405_n
25105635_1985375688342969_618066269_n
24989534_1985375708342967_782610252_n
25181829_1985375678342970_1702563250_n
24992311_1985375691676302_1380442454_n